Chat with us, powered by LiveChat

RO Membrane Keensen SW8040
It is applicable to the desalination of raw water with salt concentration between 15000ppm and 40000ppm, and make removal for the boron is more than 90%. This membrane model was widely applied to the desalination of sea water and high concentration brackish water, concentration and recycle treatment for high salt wastewater.

SPECIFICATIONS & PARAMETERS
Model Active Membrane Area ft2(m2) Permeate Flow GPD(T/D) Stable Rejection Rate (%) Min. Rejection Rate (%)
SW-8040 420(39.0) 8500(32.1) 99.7 99.5
STANDARD TEST CONDITION
Concentration of Solution (NaCl) Temperature(℃) pH Value Operating Pressure psi(MPa) Recovery Rate (%)
32000ppm 25 7.5-8 800(5.5) 8
Notes: The permeate flow of single membrane element may vary with in ±15%.

Operating Limits and Conditions of Membrane Element:

Max.Working Pressure 1200 psi(8.3MPa)
Max. FeedWater Temperature 45 ℃
Max. Feed Water Flow 17.0m3/h(8040), 3.6m3/h(4040), 1.4 m3/h(2540)
Max. FeedWaterSDI15 5.0
Free Chlorine Concentration of FeedWater 0.1mg/L
pHRange of FeedWaterDuring Continuous Operation 3-10
pHRange of FeedWaterDuring Chemical Cleaning 2-12
Max. Pressure Drop of Single Membrane Element 13psi(0.09Mpa)

Weight 4,2 kg
Dimensions 112,0000 × 15,0000 × 15,0000 cm
support

Call us
(021) 6679325 | Fax. (021) 6679445

message

Write to us

[email protected]

sign

Contact Info

Jl. Muara Karang Blok L9 Timur No. 8 Pluit, Jakarta Utara 14450

Sign up to Our Newsletter

[mc4wp_form id="4242"]